| |
NewswireTODAY - /newswire/ -
Appleton, WI, United States, 2010/10/19 - Two GD&T seminars being offered - Geometric Dimensioning and Tolerancing and Tolerance Stack-Up Analysis. Both courses presented by James D. Meadows, nationally-recognized GD&T ‘expert’, best-selling GDT author.
|
| |
Join GD&T expert James D. Meadows has he offers two GD&T public seminars. You have the option of attending one or both.
Course 1: Geometric Dimensioning and Tolerancing [per the ASME Y14.5-2009 and 1994 Standards...and the Differences between them]
December 6-8, 2010
This course is targeted at those who have already been trained in the basics of Geometric Dimensioning and Tolerancing. Even the most advanced practitioners will learn more than they ever thought possible in this workshop. Based on the most comprehensive GD&T textbook ever written by a single author, Geometric Dimensioning and Tolerancing in 2007, this course has the unprecedented ability to cover almost every facet of tolerancing (on, for example, sheet metal parts, injected molded parts, amorphic surfaces, as well as simple rectangular parts). You will learn how to dimension and tolerance all types of parts and assemblies, including those requiring complex geometry.
Course 2: Tolerance Stack-Up Analysis
December 8-10, 2010
Tolerance Stack-Up Analysis - This course is directed to anyone with the professional responsibility of analyzing or applying tolerances to assemblies, or anyone seeking a more thorough understanding of tolerance analysis. Attendees should have a basic working knowledge of ASME Y14.5M-1994. [Each course participant needs to bring a hand-held calculator.] Course participants will be trained to apply tolerance stack-up analysis techniques to a wide variety of assemblies, from the very simple to the more complex situations commonly faced in industry today. Both plus and minus and geometrically toleranced assemblies will be examined and stack-up analysis taught and practiced on each. Many different datum structures will be discussed and analyzed. The concepts taught in this course are: loop analysis (also known as circuit diagrams), number charting, virtual condition, resultant condition, inner and outer boundaries, minimum airspace, maximum wall thickness, maximum interference, minimum and maximum overall dimensions, fixed and floating fastener assembly conditions, projected tolerance zones, the logic of stack-up analysis, statistical tolerancing, and much more.
Based on course or courses registered for, attendees receive:
Geometric Dimensioning and Tolerancing--Application, Analysis & Measurement [per ASME Y14.5-2009] and the workbook Workbook and Answerbook for Geometric Dimensioning and Tolerancing [per ASME Y14.5-2009] © by James D. Meadows for the GD&T course
text/workbook Tolerance Stack-Up Analysis © by James D. Meadows
Certificate of Course Completion
Use of our invaluable GD&T ‘HOTLINE’ after training for answers to student technical questions
DETAILS: Location Both classes will be held at the Bevill Conference Center & Hotel, 550 Sparkman Drive, HUNTSVILLE, AL 35816 (256) 824-4721
Discounts -15% government employees and government contractors/sub-contractors; -15% for 3-5 attendees from the same company; -25% for any organization sending 6 or more attendees from the same company to both courses; discount for anyone attending both courses. Only one discount will apply. Call for discount specials for special situations. For govt. discount, do not use our website PayPal as it does not offer that discount.
|
JWinchell[.]geotolmeadows.com 
