NEWSWIRETODAY Press Release& Newswire Distribution | HOME
PRTODAY / NewswireToday press release distribution service network
Check Ads Availability|e-mail Article

Are you the owner of this article?, Turn it PREMIUM with your LOGO instead - and make it 3rd party Ads-Free! within the next hour!

AIJU & Cidetec Carry Out New Material Formulations - AIJU and Cidetec use the plastograph to make new material formulations in a laboratory scale
AIJU & Cidetec Carry Out New Material Formulations


NewswireToday - /newswire/ - Ibi, Alicante, Spain, 2009/05/18 - AIJU and Cidetec use the plastograph to make new material formulations in a laboratory scale.

Your Banner Ad Here instead - Showing along with ALL Articles covering Engineering / Artificial Intelligence Announcements

Replace these Affiliate Programs at ANYTIME! Your banner here within the next hour. Learn How!


The use of a polymer in product making generally requires it to be blended with other ingredients, which add certain special characteristics to the final product.
Due to the high cost of plastic as well as the use of certain types of charges and additives, it is advisable to use equipment which optimizes the production process before starting extrusion on a grand scale.
The Plastograph is a blender-kneader machine which allows one to get Polymeric Material Formulations, easily and quickly, on a laboratory scale to make further characterization tests parallel to the production tasks.
The Technological Research Centre for Toys (AIJU), recently checked the efficiency of this machine to obtain reference materials with heavy metals, according to the RoHS Directive, for the verification and validation of the screening technique, which uses X-Ray Fluorescency, and to study the capacity of certain additives to retain volatile substances such as phenol, benzene, xilene, toluene and etilbenzene in order to minimize the presence of toxic pollutants in toys.
So, in collaboration with the New Materials Department of CIDETEC, AIJU has processed different formulations by using a Plastograph to obtain reference materials.

Performance of the Work
The work consisted of, on the one hand, obtaining polyethylene materials with different concentrations of Cd, Pb and Cr to carry out the X-ray Fluorescence Test and compare it with the common test and, on the other hand, in obtaining polyethylene and phenol materials with a certain amount of B20 and B40 fillers in order to study the retention capacity they have for volatile substances as well as their migration values.
Parallel to this, the efficacy of the obtained reference materials will be checked using this preparation method, studying the mechanical properties and the homogeneity of the samples.

To prepare the samples BP Solvay HD5218EA type Polyethylene was used, with a Fluidity Index of 18 g/10 min. and a melting point of 131ºC.
Polyethylene is a versatile, inert, cheap polymer in the plastic sector and chemically speaking the simplest of the polyolefin family.

Figure 1: Polyethylene Chemical Structure.
The metals subjected to the study were used in pure oxides forms (PbO, CdO, CrO3), because they have good thermal stability and are hardly volatile, although as they are relatively toxic, security measures must be taken.
Besides, Phenol and B20 & B40 charges were used for the mechanical properties study.

The following laboratory equipment was used:
• Plastograph, laboratory version by BRABENDER
• Hot plates press.

Samples Preparation
The Plastograph, is an internal blender built with a high temperature compartment which has two rotors which turn in opposite directions, together they melt and blend the material till an homogeneous mixture is obtained. The resulting mass can be introduced into a Hot Plates Press to get the final samples in a film form.
CIDETEC’s Plastograph with which the samples were obtained.

Plastograph Rotors.
For each test the Plastograph measures the torque force applied by the rotors when turning, over a time scale for a certain temperature. When the material is introduced in the interior of the compartment, the torque force quickly increases as the rotors change from an empty rotation to a sample-filled rotation. Upon the polymer melting or mixing with fillers takes place, the torque strength turns constant over time.
Figure 4 shows, for a specific temperature, the typical graph obtained which demonstrates the torque force of the rotors when turning based on the time scale for a certain sample.

Illustration of the torque force against the Plastograph Temperature for a determined Polyethylene sample.
Before preparing the reference materials, the process conditions were optimized for the polyethylene used. The most appropriate one for 40 g of polyethylene was 140ºC and 20 minutes of mixing/kneading.
To obtain the materials, polyethylene is introduced from the top side of the chamber which, in this precise case was used in grain form and blended with the corresponding additives. It is closed and secured with a 5 Kg weight to apply pressure which facilitates the melting and mixing and stops the sample leaking out of the top side.
When the mixing time is over, the deposit is opened and the mixture is spread over the rotors and the internal deposit (figure 5) with a copper spatula after letting it cool for a while. The resulting mixture is then pressed in the Hot Plate Press.

Appearance of the mixed sample after the kneading process.

The different resulting reference materials have been split up into two groups. On the one hand, the mechanical properties of the materials have been studied, adding B20 and B40 fillers in different proportions to see the effect they produce. On the other hand, the homogeneity and lineament of the obtained samples with different concentrations of heavy metals in order to verify and validate the screening technique which X-Ray Fluorescence employs, and to verify the efficiency of the resulting materials.

Figure 6: Reference materials prepared for the tests.

Mechanical Properties
With the aim of evaluating the mechanical traction properties of the different materials obtained, test specimens were cut into a special shape (EN ISO 527) and afterwards they were tested in a universal test machine INSTRON 6025.
Figure 7 and 8 compare the Elasticity Range with the breaking point force obtained by adding B20 and B40 fillers in 5% and 10% doses.

Elasticity Module.
When adding 5% of sepiolita B20 or B40 fillers, no change in the elasticity modulus is observed. Nevertheless, 10% of filler in the blend results in an increase in the material stiffness as well as in a higher module.

Breaking point force (MPa).
By adding B40 at 5% and 10% (in weight) a higher stress breaking point value is obtained than in the B20 case. An important decrease in the resistance is also noticed with the adding a 10% amount of B20 with regard to that obtained with only 5%.

Chemical properties
Homogeneity: To study the homogeneity, each sample was split up into 10 groups, which were analysed by using X-Ray Fluorescence. The results were generally good, except for lead (Pb), which showed some deviation as can be seen in the following figure 9.

Homogeneity Study for a 1000 ppm sample
Below, as an example, an X-Ray Fluorescence spectrum obtained after the analysis of a sample of 1000 ppm in Pb and Cr and 100 ppm in Cd is included.

X-Ray Fluorescent Spectrum for a 1000 ppm Pb sample.

Regarding the calibration, for lead (Pb) and chrome, acceptable regressions were obtained. However, for cadmium it would be advisable to produce new materials. The following figure shows the lead (Pb) calibration, as an example.

Calibration obtained for Lead

The Plastograph is an efficient way to develop reference materials prior to industrial production by conventional techniques such as injection or extrusion. It allows one to get a varied range of plastic formulations with the aim of studying their mechanical properties, and carrying out characterization studies and chemical tests for project development and process improvement. Moreover, as it uses only a small amount of material, the development cost is minimal.

Your Banner Ad Here instead - Showing along with ALL Articles covering Engineering / Artificial Intelligence Announcements

Replace these Affiliate Programs at ANYTIME! Your banner here within the next hour. Learn How!


Written by / Agency / Source: AIJU (Toy Technological Institute)


Availability: All Regions (Including Int'l)


Traffic Booster: [/] Quick NewswireToday Visibility Checker


Distribution / Indexing: [+]

# # #
  Your Banner Ad showing on ALL
Engineering / Artificial Intelligence articles,
CATCH Visitors via Your Competitors Announcements!

AIJU & Cidetec Carry Out New Material Formulations

Company website links NOT available to basic submissions
It is OK to republish and/or LINK any newswire for any legitimate media purpose as long as you name NewswireToday and LINK as the source.
Publisher Contact: Maria Colomina - 
+34 965554475 proyectos[.]
Newswire Today - PRZOOM / PRTODAY disclaims any content contained in this article. If you need/wish to contact the company who published the current release, you will need to contact them - NOT us. Issuers of articles are solely responsible for the accuracy of their content. Our complete disclaimer appears here.
IMPORTANT INFORMATION: Issuance, publication or distribution of this press release in certain jurisdictions could be subject to restrictions. The recipient of this press release is responsible for using this press release and the information herein in accordance with the applicable rules and regulations in the particular jurisdiction. This press release does not constitute an offer or an offering to acquire or subscribe for any AIJU (Toy Technological Institute) securities in any jurisdiction including any other companies listed or named in this release.

Engineering / Artificial Intelligence via RSSAdd NewswireToday - PRZOOM Headline News to FeedBurner
Find who RetweetFollow @NewswireTODAY

Are you the owner of this article?, Turn it PREMIUM with your LOGO instead - and make it 3rd party Ads-Free! within the next hour!

Read Latest Articles From AIJU (Toy Technological Institute) / Company Profile

Read Engineering / Artificial Intelligence Most Recent Related Newswires:

AI Adoption Generates New Business Models and Strengthens Customer Value Says Frost & Sullivan
Infineon Acquires Startup Industrial Analytics and Strengthens its Offering in AI-powered Analysis of Machinery and Industrial Equipment
Ozonetel Commended by Frost & Sullivan for its Highly Differentiated Cloud-based Contact Center Solutions with Trendsetting, Cost-effective Features
Imec Joins EuROBIN - A New Unified European Platform for R&D on AI-driven Robotics
SAP Acquires Search-Driven Analytics Company Askdata
New AI-powered Trend Detection Monitors Federal Litigation in Real Time, Identifies Opportunities for Business Development and Client Service
New Unified Qualcomm AI Stack Portfolio Revolutionizes Developer Access and Extends AI Leadership Across the Connected Intelligent Edge
Frost & Sullivan Recognizes Groq with the Technology Innovation Leadership Award for its Sophisticated Processor Architecture Technology
Frost & Sullivan Recognizes Infosys for Accelerating Digital Transformation, Addressing Real-world Problems with its Applied AI Offering
Lumigo Applauded for Simplifying Complex Business App Architectures with its Cloud-native App Observability Platform
NEC Provides AI-based Traffic Monitoring System with Fiber-optic Sensing Technology for NEXCO CENTRAL
SAS IoT to Demonstrate SAS Grid Guardian AI At DISTRIBUTECH International
Alstom and Chula Engineering Partner to Strengthen Thailand’s Railway Industry and Build Engineering Talent Pipeline
HyperSense Named in 2022 Gartner® Market Guide for Multipersona Data Science and Machine Learning Platforms
Evolution of the Smart Home Hub is the Next Growth Frontier Finds Frost & Sullivan

Boost Your Social Network
& Crowdfunding Campaigns

NewswireToday Celebrates 10 Years in Business


Heavenly Culture World Peace Restoration


  ©2022 NewswireToday — Limelon Advertising, Co.
Home | About | Advertise/Pricing | Contact | Investors | Privacy/TOS | Sitemap | FRANCAIS
newswire, PR press releases distribution service magazines engine news alert newsroom press room breaking news public relations articles company news alerts newswiredistribution ezine bizentrepreneur biznewstoday digital business report market search pr firms agencies reports distri-bution today investor relation successful internet entrepreneurs newswire distribution newswiredistribution asianewstoday bizwiretoday USA pr UK today - NOT affiliated with PRNewswire as we declined their partnership offer in 2013
PRTODAY & NewswireTODAY are proudly NOT affiliated with USA TODAY (