| |
This unique three-coat system provides vessels with a smoother hull. It reduces drag and results in significantly lower fuel requirements, and will deliver a guaranteed maximum speed loss• of 1.2 percent over five years.
The Hempaguard MaX system is applied in just three layers, meaning it can be applied more quickly, reducing time in dry dock by up to two days. The combined savings generated by Hempaguard MaX through reduced time in dry dock and increased fuel savings could payback the cost of the coating within three months**. With these exceptional out of dock fuel savings and full operational flexibility Hempaguard MaX maximises efficiency and reduces operational costs.
Speaking at today’s launch in London, Hempel’s Head of Marine Group Product Management, Davide Ippolito, said:
“The high level of fuel savings and hull protection are achieved due to the low average hull roughness (AHR) level delivered by the whole coating system, very low speed loss• over the entire operational period and improved anticorrosive capabilities.”
“Hempaguard MaX is the next logical step for shipowners and operators seeking to maximise their efficiency and reduce associated CO2 emissions. At a time where marginal gains are of importance and environmental regulations are becoming stricter, the choice of hull coating can make a significant difference.”
About the three-coat system technology
Hempel’s new system builds on the overwhelming success of its flagship hull coating Hempaguard X7. Since its launch in 2013, this coating has been applied to over 1500 vessels allowing those owners to collectively reduce their annual bunker bill by a staggering USD 500 million and over 10 million tonnes in CO2 emissions.
The strength of Hempaguard MaX is its ability to successfully exploit the synergies between its three different layers: Hempaprime Immerse 900, tie-coat Nexus II, and Hempaguard X8.
The top coat Hempaguard X8, driving the exceptional antifouling performance, is built on Hempel’s enhanced patented Actiguard® technology. This unique coating combines the smoothness of a silicone coating with an improved hydrogel microlayer and active ingredient to provide outstanding antifouling performance, full operational flexibility and smooth hull.
Hempaprime Immerse 900 and Nexus II contribute significantly to Hempaguard MaX’s low AHR. A smoother hull delivers less drag and improved fuel efficiency from day one.
Hempaprime Immerse 900 is an anticorrosive primer that can be applied in one coat, while Nexus II is a next generation tie-coat technology with improved anticorrosive capabilities. Together, they provide the same protection delivered by two standard maintenance epoxy coats, reduce time in the dock for faster return to service and ultimately save money for the shipowner and operators.
The new three-coat Hempaguard MaX system used together with SHAPE, Hempel’s System for Hull and Propeller Efficiency, is now the new peak for fuel efficiency available to commercial shipowners and operators.
Hempaguard MaX at a glance:
- Powerful advanced fouling defence coating system with increased smoothness
- Low Average Hull Roughness (AHR) driven by the whole coating system improving fuel efficiency
- 1.2 per cent maximum guaranteed speed loss• over five years
- Enhanced anti-corrosive capabilities
- Three coat system that saves up to two days in dock saving time and money.
- Improved idle time antifouling guarantee of 120 days
Actiguard Technology:
A ground-breaking technology that integrates, in a single coating, silicone-hydrogel and great control of biocide diffusion.
• Speed loss: If a vessel’s main engine is set at a certain power output, it will propel the ship through the water at a certain speed. Over time, fouling accumulation will increase drag and cause the speed of the ship to reduce even if the main engine power output remains constant. This reduction in speed is termed “speed loss”.
*• Based on a VLCC with activity level of 70 per cent and burning low sulphur fuel costing 35 per cent more than standard bunker fuel over a five-year life cycle. Hempaguard MaX system delivers an annual saving of around USD 1.8 million compared to a market average antifouling. This equates to a ROI (return on investment) of three months.
Issued by Navigate PR (contact Katerina Dimitropoulos kdimitropoulos[.]navigatepr.com)
About Hempel
As a world-leading supplier of trusted coating solutions, Hempel (hempel.com) is a global company with strong values, working with customers in the protective, marine, decorative, container and yacht industries. Hempel factories, R&D centres and stock points are established in every region.
Across the globe, Hempel’s coatings protect surfaces, structures and equipment. They extend asset lifetimes, reduce maintenance costs and make homes and workplaces safer and more colourful. Hempel was founded in Copenhagen, Denmark in 1915. It is proudly owned by the Hempel Foundation, which ensures a solid economic base for the Hempel Group and supports cultural, social, humanitarian and scientific purposes around the world.
|
savst[.]hempel.com / communications[.]hempel.com 
