NewswireToday - /newswire/ -
San Luis Obispo, CA, United States, 2010/02/22 - DataBridge™ is a wireless I/O module used for easy bridging of analog, digital, and UART data.
Two modules automatically link together and function as a wireless cable, bridging both sides through a low-latency, full-duplex wireless link. Each module includes 6 digital inputs, 6 digital outputs, 2 analog inputs, 2 analog outputs, and UART transmit and receive.
Signals are sampled and repeated 200 times per second with a latency of only 5 milliseconds. DataBridge™ offers the lowest latency on the market, while maintaining low power and long range. Reliable data delivery is ensured by avoiding interference through frequency hopping, and data integrity is maintained using checksums and acknowledgments.
Using simple jumpers, each DataBridge™ device can be configured as a master or slave, and up to 16 device pairs can operate in the same area by setting a Network ID. UART baud rates are also configurable without software, and can display all I/O and status information for additional control.
No software configuration or programming is required.
• Easy Point-to-Point Wireless
• Analog, Digital, and Serial Bridge
• 6 Digital Inputs, 6 Digital Outputs
• 2 Analog Inputs, 2 Analog Outputs
• UART Data Transmit and Receive
• 200 Samples per Second
• Extremely Low Latency (5mS)
• Full-duplex Communication
• 2.4Ghz Frequency Hopping
• Reliable Data Delivery
• Up to 16 Device Pairs
• 1mW or 100mW
• Up to 4km Range
• Internal or External Antenna
• 2.7V – 3.6V Operation
• Small Form Factor
• Power Saving Sleep Mode
• RSSI and Link Indication
• Temperature and Voltage Monitor
• FCC, Canadian, and ETSI Certified.
About Starman Electric
Starman Electric (starmanelectric.com) provides easy to use solutions for point-to-point wireless I/O for hobbyists and professionals.