As from the third quarter 2017, PM 10, which is currently producing SC paper, will be producing waste paper-based lightweight containerboard. After full conversion, PM 10 will be among the most efficient paper machines in the lightweight containerboard sector with a working width of 7,500 mm and a design speed of 1,600m/m.
ANDRITZ will deliver a new OCC line and PM approach system. The recycled fiber line includes a FibreSolve FSR pulper with detrashing system. With a volume of 130 m³, it is the biggest low-consistency pulper ever installed by ANDRITZ in Europe.
The scope of supply also includes a new PrimeFlow TW two-layer headbox with PrimeProfiler F consistency profiling system and a PrimeForm TW gap former.
In the drying section, optimum runability will be achieved by using the new PrimeRun Evo web stabilization system with a high-vacuum zone at the paper release point. PrimeDry Steel cylinders will be used to get maximum drying capacity and paper width on the existing machine frame. The new PrimeCoat Film film press applies surface starch to both sides of the paper web simultaneously. In addition, a PrimeAir Glide air turn and a PrimeFeeder ropeless tail threading system will be supplied. The order further includes the entire basic engineering as well as the extensive automation package Prime Control PCS7.
This order once again confirms the strong business relationship between ANDRITZ and Heinzel Group. During the past years, ANDRITZ successfully delivered Europe’s largest PrimeLine MG paper machine with the world’s largest PrimeDry Steel Yankee as well as a new black liquor recovery boiler plant to Zellstoff Pöls AG, member of Heinzel Group.
International Heinzel Group (heinzel.com) with its affiliates Laakirchen Papier AG, Zellstoff Pöls AG, both Austria, Raubling Papier GmbH, Germany, and AS Estonian Cell, Estonia ranks among the largest producers of market pulp, corrugated containerboard and magazine paper in Central and Eastern Europe.
About The ANDRITZ GROUP
ANDRITZ (andritz.com) is a globally leading supplier of plants, equipment, and services for hydropower stations, the pulp and paper industry, the metalworking and steel industries, and for solid/liquid separation in the municipal and industrial sectors. The publicly listed technology Group is headquartered in Graz, Austria, and has a staff of approximately 25,700 employees. ANDRITZ operates over 250 sites worldwide.
About ANDRITZ PULP & PAPER
ANDRITZ PULP & PAPER is a leading global supplier of equipment, systems, and services for the production and processing of all types of pulps, paper, tissue, and cardboard. The technologies cover processing of logs, annual fibers, and waste paper; production of chemical pulp, mechanical pulp, and recycled fibers, recovery and reuse of chemicals, preparation of paper machine furnish; the production of paper, tissue, and board; calendering and coating of paper; as well as treatment of reject materials and sludge. The service range includes modernization, rebuilds, spare and wear parts, service and maintenance, as well as machine transfer and second-hand equipment. Biomass, steam, and recovery boilers, as well as gasification plants for power generation, flue gas cleaning plants, plants for the production of nonwovens, dissolving pulp, and panelboards (MDF) as well as recycling plants are also allocated to the business area.