NewswireToday - /newswire/ -
Vancouver, British Columbia, Canada, 2014/12/03 - GE Oil & Gas on Tuesday announced LNG Canada Development, Inc. has selected GE’s high-efficiency LMS100-PB dry low emission (DLE) aeroderivative gas turbine - LNGCanada.ca / GE.com. NYSE: GE
GE Oil & Gas on Tuesday announced LNG Canada Development, Inc. has selected GE’s high-efficiency LMS100-PB dry low emission (DLE) aeroderivative gas turbine as well as vertically and horizontally split centrifugal compressor technologies for its proposed gas liquefaction plant for the export of liquefied natural gas (LNG) in Kitimat, British Columbia.
The LMS100-PB is the largest aeroderivative gas turbine available with a free power turbine, ideally positioning it for large LNG applications. With its aviation heritage and the introduction of intercooling technology, the LMS100 offers the highest simple-cycle efficiency of any industrial gas turbine. Rated at 105 megawatts and 45 percent efficiency at ISO conditions, the LMS100-PB provides clear advantages in total cost of ownership.
The aerodynamically coupled free power turbine provides speed, flexibility and high torque for typical LNG compressor loads especially during start sequencing with pressurized conditions in the refrigeration loop, avoiding the need for starter/helper motors.
“We are delighted that LNG Canada has selected our technology. The unparalleled efficiency of the LMS100 turbine combined with our compressors, which build on more than 30 years of experience in LNG applications, makes us confident that the proposed configuration represents the simplest and most integrated solution currently available to the industry,” said Rafael Santana, CEO & President Turbomachinery Solutions for GE Oil & Gas. “Through its DLE technology, the LMS100-PB model will also provide best-in-class emissions for baseload operation. Selecting GE’s LMS100 technology helps LNG Canada support its environmental obligations to the Kitimat region.”
"The decision to power our facility with highly efficient natural gas turbines and compressors in combination with renewable electricity reflects our commitment to listen to and act on feedback from our stakeholders, when possible,” says Andy Calitz, CEO of LNG Canada Development Inc. “LNG Canada’s vision is to work collaboratively with First Nations, the local community and stakeholders to deliver a project that is safe, reliable and reflective of community interests.”
LNG Canada has selected natural gas turbines for the liquefaction process to minimize fuel use and greenhouse gas emissions. LNG Canada also recently signed a power agreement with BC Hydro to use clean, renewable electricity from BC Hydro for a portion of the electricity needed for the facility.
LNG Canada estimates the proposed facility will have a greenhouse gas emission intensity of about 0.15 tonne CO2e/tonne LNG produced, which is lower than benchmarks recently introduced by the B.C. government and among the lowest CO2-emitting LNG facilities in the world.
While Tuesday’s announcement is an important step forward for the proposed LNG Canada project, LNG Canada must ensure the project is economically viable and meet several other significant milestones related to gas supply, engineering and cost estimates, supply of labor and regulatory approval prior to making a final investment decision.
About LNG Canada
LNG Canada comprises Shell Canada Energy (50%), an affiliate of Royal Dutch Shell plc, and affiliates of PetroChina (20%), Korea Gas Corporation (15%) and Mitsubishi Corporation (15%). This operating entity is incorporated and registered under the federal laws of Canada.
The joint venture is proposing to build an LNG export facility in Kitimat that initially consists of two LNG processing units referred to as “trains,” with an option to expand the project in the future to four trains.
GE (ge.com) works on things that matter. The best people and the best technologies taking on the toughest challenges. Finding solutions in energy, health and home, transportation and finance. Building, powering, moving and curing the world. Not just imagining. Doing. GE works.
About GE Oil & Gas
GE Oil & Gas works on the things that matter in the oil and gas industry. In collaboration with our customers, we push the boundaries of technology to bring energy to the world. From extraction to transportation to end use, we address today's toughest challenges in order to fuel the future.
Contact: Tom Murnane / Howard Masto
Masto Public Relations
P: +1 518-786-6488
E: tom.murnane[.]mastopr.com / howard.masto[.]ge.com.
LNG Canada: E: media[.]lngcanada.ca.