PRTODAY / NewswireToday Free press release distribution service network

Written by / Agency / Source: Global Unichip Corp. (GUC)

Check Ads Availability|e-mail Article


Are you the owner of this article?, Turn it PREMIUM with your LOGO instead - and make it 3rd party Ads-Free! within the next hour!

Global Unichip Corporation Uses Cadence Encounter Digital Implementation System to Complete its First Production Design on TSMC 16FF+ Process - Cadence Digital Solution Enabled GUC to Improve System Performance by 2X and Deliver 180 Million Gate SoC Design [NASDAQ: CDNS] - Cadence.com / GUC-ASIC.com
Global Unichip Corporation Uses Cadence Encounter Digital Implementation System to Complete its First Production Design on TSMC 16FF+ Process

 

NewswireToday - /newswire/ - San Jose, CA, United States, 2014/10/21 - Cadence Digital Solution Enabled GUC to Improve System Performance by 2X and Deliver 180 Million Gate SoC Design [NASDAQ: CDNS] - Cadence.com / GUC-ASIC.com. TSE: 3443

   
 
Your Banner Ad Here instead - Showing along with ALL Articles covering Electronics/Instrumentation/RFID Announcements

Replace these Affiliate Programs at ANYTIME! Your banner here within the next hour. Learn How!


 

Cadence Design Systems, Inc., a leader in global electronic design innovation, and Global Unichip Corporation (GUC), the Flexible ASIC Leader™, today announced that GUC used the Cadence® Encounter® Digital Implementation System to tape out its first production high performance computation ASIC design on TSMC’s 16nm FinFET Plus (16FF+) process. The combination of the Cadence digital solution with the 16FF+ process provided GUC with a 2X system performance improvement, an 18 percent frequency increase, and a 28% power reduction over their previous design.

GUC utilized the Encounter Digital Implementation System to address the implementation challenges that arise at 16FF+, including increased double-patterning and FinFET design rule checking (DRC), timing and power variability, and throughput requirements. In addition, the Encounter system provided:

• A correct-by-construction, comprehensive double-patterning and FinFET-enabled flow that spans floorplanning, placement, and routing to electrical and physical signoff
• Seamless integration with Cadence Litho Physical Analyzer and Cadence CMP Predictor to enable design-for-manufacturing (DFM)
• Multi-threaded GigaOpt and NanoRoute technologies that employed massive parallelization to effectively handle the increase in DRC rules and design size
• The GigaOpt advanced on-chip variation (AOCV) and route-driven technologies that improved the performance and power of the SoC

“As a leader in ASIC designs, we need to deliver very complex designs to our customers in a timely manner, and the Cadence tools and team have helped us do this,” said Jim Lai, president of Global Unichip Corporation. “We chose to work with Cadence on the development of our design because of their extensive experience with TSMC at advanced nodes. Before we completed our first full production tapeout, we also taped out several 16nm test chips using the Cadence tool set and experienced excellent silicon results. Thanks to the collaboration between the Cadence and GUC teams, we met an aggressive three-month design-to-tapeout schedule for our 180M gate production design.”

“Encounter Digital Implementation System is designed to provide the most effective methodology for 100M+-instance high performance and power-efficient designs,” said Anirudh Devgan, senior vice president, Digital and Signoff Group, Cadence. “The Encounter system has been validated by TSMC on the 16FF+ process, which gives GUC and other customers the confidence that they can achieve the fastest path to design closure at advanced nodes.”

About Cadence
Cadence (cadence.com) enables global electronic design innovation and plays an essential role in the creation of today’s integrated circuits and electronics. Customers use Cadence software, hardware, IP, and services to design and verify advanced semiconductors, consumer electronics, networking and telecommunications equipment, and computer systems. The company is headquartered in San Jose, Calif., with sales offices, design centers, and research facilities around the world to serve the global electronics industry.

About GLOBAL UNICHIP CORP. (GUC)
GLOBAL UNICHIP CORP. (guc-asic.com) is the Flexible ASIC Leader™ that provides the semiconductor industry with leading IC implementation and SoC manufacturing services. Based in Hsinchu Taiwan, GUC has developed a global reputation with a presence in China, Europe, Japan, Korea and North America. GUC is publicly traded on the Taiwan Stock Exchange under the symbol 3443.

©2014 Cadence Design Systems, Inc. All rights reserved worldwide. Cadence, the Cadence logo, and Encounter are registered trademarks of Cadence Design Systems, Inc. in the United States and other countries. All other trademarks are the property of their respective owners.

 
 
Your Banner Ad Here instead - Showing along with ALL Articles covering Electronics/Instrumentation/RFID Announcements

Replace these Affiliate Programs at ANYTIME! Your banner here within the next hour. Learn How!


 

Written by / Agency / Source: Global Unichip Corp. (GUC)

 
 

Availability: All Regions (Including Int'l)

 

Traffic Booster: [/] Quick Newswire Today Visibility Checker

 

Distribution / Indexing: [+] / [Company listed above is a registered member of our network. Content made possible by PRZOOM / PRTODAY indexing services]

 
 
# # #
 
 
  Your Banner Ad showing on ALL
Electronics/Instrumentation/RFID articles,
CATCH Visitors via Your Competitors Announcements!


Global Unichip Corporation Uses Cadence Encounter Digital Implementation System to Complete its First Production Design on TSMC 16FF+ Process

Company website links NOT available to basic submissions
It is OK to republish and/or LINK any newswire for any legitimate media purpose as long as you name Newswire Today and LINK as the source.
 
  Is this your article?
Activate ALL web links and social stream by Upgrading to Press Release PREMIUM Plan Now!

Flexible ASIC Leader™ | Cadence Design Systems
Publisher Contact: Press Office - GUC-ASIC.com 
+886 3-5646600 pr[.]globalunichip.com
 
Newswire Today - PRZOOM / PRTODAY disclaims any content contained in this article. If you need/wish to contact the company who published the current release, you will need to contact them - NOT us. Issuers of articles are solely responsible for the accuracy of their content. Our complete disclaimer appears here.
IMPORTANT INFORMATION: Issuance, publication or distribution of this press release in certain jurisdictions could be subject to restrictions. The recipient of this press release is responsible for using this press release and the information herein in accordance with the applicable rules and regulations in the particular jurisdiction. This press release does not constitute an offer or an offering to acquire or subscribe for any Global Unichip Corp. (GUC) securities in any jurisdiction including any other companies listed or named in this release.

Electronics/Instrumentation/RFID via RSSAdd NewswireToday - PRZOOM Headline News to FeedBurner
Find who RetweetFollow @NewswireTODAY



Are you the owner of this article?, Turn it PREMIUM with your LOGO instead - and make it 3rd party Ads-Free! within the next hour!


Read Latest Articles From Global Unichip Corp. (GUC) / Company Profile


Read Electronics/Instrumentation/RFID Most Recent Related Newswires:

Imec Develops 3D-Compatible Germanium nMOS Gate stack with High Mobility and Superior Reliability
Curtiss-Wright to Expand Position in Data Acquisition & FTI Markets with Acquisition of Teletronics Technology Corporation
Datalogic Receives Top Honor At Inspect Awards 2017
Leonardo Sees Surge in Export Orders for Man-portable Laser Designators from US and Europe
Imec Demonstrates World’s First Vertically Stacked Gate-all-Around Si Nanowire CMOS Transistors
GE Ventures, Microsemi and Corning Partner to Launch Menlo Micro and Next Generation of Electronic Switching
Frost & Sullivan Commends LeEco for Driving Innovation in the North American Smart Technologies Market
Malvern Instruments and PANalytical to Merge
Bruker Announces Corporate Partnership with International Phenome Centre Network (IPCN) for NMR Technologies and SOPs
Predictive and Control Capabilities through IoT Rapidly Expand Global Growth Opportunities for Sensors Finds Frost & Sullivan
IDEX Showcased the World’s First Flexible Touch Fingerprint Sensor for SmartCards and Receives Massive Industry Interest
Endress+Hauser Consult AG Introduces Proline 300/500 - Flow Measuring Technology for the Future
Lipigas Delivers Enhanced Interactive and Visual Mobile Self-Service Portal Using Joint Visual IVR Solution from Dialogic and Telectronic
Customized Electronic Ticket Solutions Simplify Daily Commute in Russian Cities
Bruker AXS Introduces A New Member to The D8 ADVANCE Family - The D8 ADVANCE Plus™

Boost Your Social Network
& Crowdfunding Campaigns


LIFETIME SOCIAL MEDIA WALL
NewswireToday Celebrates 10 Years in Business


PREMIUM Members


Visit  JobsWare.com

Visit  BizJobs.com





 
  ©2016 Newswire Today — Limelon Advertising, Co.
Home | About | Advertise/Pricing | Contact | Investors | Privacy/TOS | Sitemap | FRANCAIS
newswire, PR free press releases distribution service magazines engine news alert newsroom press room breaking news public relations articles company news alerts newswiredistribution ezine bizentrepreneur biznewstoday digital business report market search pr firms agencies reports distri-bution today investor relation successful internet entrepreneurs newswire distribution prtoday.com freenewswiredistribution asianewstoday bizwiretoday USA pr UK today - NOT affiliated with PRNewswire as we declined their partnership offer in 2013
 
PRTODAY & NewswireTODAY are NOT affiliated with USA TODAY (usatoday.com)