• Nearly $200 Million Contract for New Units will Convert Facility from Simple to Combined-Cycle;
• Project to Increase Plant Capacity by More than 50 Percent and Add 1,300 Megawatts to the Saudi Grid;
• Demonstrates GE Commitment to Support SEC in Meeting the Kingdom’s Growing Energy Requirements.
GE (NYSE: GE) has received a contract for nearly $200 million to supply steam turbine technology, power generation services and distributed control systems for the conversion of Saudi Electricity Company’s (SEC) PP10 power plant from simple to combined-cycle operation. The project will add 1,300 megawatts to the plant’s capacity to support the growing power requirements of Saudi Arabia’s central region and help the Kingdom meet summer peak demands.
“The conversion to combined-cycle operation is part of our growth plan to add an average of 4,000 megawatts of power each year, with a vision of doubling the grid capacity by the year 2020,” said Eng. Ali Saleh Al Barrak, president and CEO for SEC. “This new contract reflects our continued trust in GE’s technology solutions and ability to respond to our power generation requirements. In addition to increasing plant capacity by more than 50 percent, from about 2,200 to 3,500 megawatts, the conversion will raise overall plant efficiency.”
“This new agreement is testimony to our growing relationship with SEC and reflects our continued commitment to deliver tailored technology solutions to the Saudi energy sector,” said Joseph Anis, GE Energy’s president and CEO for the Middle East. “As the Kingdom’s energy technology partner, we take pride in supporting SEC’s goal to meet the Kingdom’s growing power demand with efficiency enhancing solutions that also are flexible and scalable.”
GE will now provide 10 of its SC series steam turbines specifically for the PP10 combined-cycle expansion. GE previously supplied 40 7EA Gas Turbines for the PP10 site. The combined-cycle conversion enables the plant to increase its output without any increase in fuel, boosting its operating efficiency.
In addition to the SC series steam turbines, GE will supply new balance-of-plant mechanical and electrical equipment. An existing simple-cycle Mark• Vle integrated control system (ICS) will be expanded to incorporate the entire combined-cycle plant. GE power generation services will include installation, testing, commissioning and completing the combined-cycle conversion.
Shipment of the GE equipment is scheduled to begin in the first quarter of 2013, with services to start in the second quarter of that year. The first two combined-cycle blocks at PP10 are scheduled to begin commercial operation in the second quarter of 2014, in time to meet summer peak demands, while the full combined-cycle plant will be online by the first quarter of 2015.
The Riyadh PP10 site recently entered commercial operation in simple-cycle mode and is adding about 2,000 megawatts to Saudi Arabia’s grid to support the country’s electricity demand and increase the power capacity in SEC’s Central Operation Area by 20 percent.
Building on a successful 40-year-old relationship, GE’s on-time delivery of the Frame 7EA gas turbines for the Riyadh PP10 site enabled SEC to provide reliable electricity for the Riyadh Central grid. GE’s Mark VIe ICS installed at PP10 is improving overall plant reliability and will deliver operational and maintenance efficiency over the generating life of the power plant. The Riyadh PP10 site is currently the biggest installation worldwide for GE's Mark VIe ICS.
With nearly 80 years of experience and 1,000 employees in Saudi Arabia, GE is expanding its energy presence in the Kingdom through knowledge-sharing initiatives and increased investments for technology centers that provide service repair support and customer training in the power, water and oil and gas sectors. GE recently inaugurated its newest technology center in Dammam, the GE Energy Manufacturing Technology Center. The $250 million facility consists of three main components—an advanced service technology center, a training center offering the latest in technical and managerial training as well as a high technology manufacturing hub for energy equipment dedicated to the entire energy value chain. Today, GE supports the generation of half the Kingdom’s electricity with more than 500 GE turbines installed at various sites around Saudi Arabia.
GE (ge.com) works on things that matter. The best people and the best technologies taking on the toughest challenges. Finding solutions in energy, health and home, transportation and finance. Building, powering, moving and curing the world. Not just imagining. Doing. GE works.
GE Energy works connecting people and ideas everywhere to create advanced technologies for powering a cleaner, more productive world. With more than 100,000 employees in over 100 countries, our diverse portfolio of product and service solutions and deep industry expertise help our customers solve their challenges locally. We serve the energy sector with technologies in such areas as natural gas, oil, coal and nuclear energy; wind, solar, biogas and water processing; energy management; and grid modernization. We also offer integrated solutions to serve energy- and water-intensive industries such as mining, metals, marine, petrochemical, food & beverage and unconventional fuels.
Follow GE Energy on Twitter @GE_Energy.
*Trademark of the General Electric Company.
P: +1 518 385 9277 - E: joanne.grybosh[.]ge.com.
Ken Darling, Masto Public Relations
P: +1 518 786 6488 - E: kenneth.darling[.]ge.com.
Howard Masto, Masto Public Relations
P: +1 518 786 6488 - E: howard.masto[.]ge.com.
GE news - Masto Public Relations - E: information[.]mastopr.com.