• Converts Waste Gas Into Useable Fuel for Powering High-Efficiency, Cleaner Electrical Generation System;
• GE Innovation Helps China’s Nationwide Initiative to Combat Emissions and Reduce Industrial Water Consumption as Part of GE Business Growth Plan.
Instead of burning waste gas in a boiler, the off-gas from Handan’s blast furnace and coke oven will power a GE 9E Gas Turbine to generate power. GE made today’s announcement at STAHL 2011 in Dusseldorf.
Handan’s benefits include higher efficiency and more output with fewer emissions when compared to traditional boiler technology for steel mills with blast furnace gas (BFG) and coke oven gas (COG), or Finex gas as byproducts of the steel mill process. The GE 9E Gas Turbine also can reduce costs for Handan by enabling them to buy less electricity from the grid with fewer emissions and a smaller footprint.
Recent Chinese government legislation is tightening the regulations on steel mill efficiency and industrial activities, with specific goals for the next five years. The new Handan power solution plant will help meet the goals for a host of government objectives, including increased non-fossil fuel energy production, lower water consumption, greater energy efficiency and reduced CO2 emissions.
“We’re being challenged to advance our thinking and find new paths to growth,” said Mr. Li Fujun, general director, power and equipment of Handan Steel Mills. “But this idea goes even further—we’re not simply doing the same things better, we’re doing something completely new. And that will have a huge impact on our efficiency, energy costs and carbon footprint.”
The waste gas used in this solution had been considered too low quality for high efficiency power generation. However, GE engineers devised a way to compress the gas and enable it to power a heavy-duty gas turbine.
“This is the lowest quality fuel we’ve ever even considered burning, but we saw the potential to redesign the energy landscape in the steel industry,” said Keiran Coulton, president, Global Industries, GE Energy. “Our engineers determined a way to compress the gas, make it more burnable and add it to the fuel options for what is otherwise a conventional power plant. In effect, we re-engineered the fuel instead of re-engineering the plant.”
GE’s 9E Gas Turbine burns a wide range of fuels including natural gas, light and heavy distillate oil, naphtha, crude, residual oil, BFG, syngas and biofuels. More than 50 9E units are installed in China. In this application, the off-gas from Handan’s blast furnace and coke oven will power the turbine, further contributing to the plant’s efficient performance. GE’s gas turbine technology uses less water and re-processes excess steam for steel mill operations. “We’re creating a continuous circle of reusing and redirecting resources to enhance the value of every process,” Coulton said.
The waste-to-value solution at Handan also will include two-stage centrifugal compressors manufactured by GE. These compressors leverage experience gained in the demanding oil and gas industry and provide superior reliability when compared to axial compressor alternatives. Each of the two gas turbine generator packages includes GE 9A5 generators with modifications to fit the largest centrifugal fuel gas compressor made by GE. Blending of the BFG and COG fuel streams will be accomplished using a GE Mark* VIe controller integrated with valves and fuel measurement systems.
The technology behind the Handan plant already has been proven at a steel mill in Wuhan, China. Work on the Handan plant is scheduled to begin in 2012.
GE Metals Solutions is part of GE Global Industries—GE Energy’s new cross-business unit that takes the best technologies from across GE Energy’s diverse portfolio and interconnects them to increase efficiency and results for customers in critical business sectors such as food and beverage, metals, mining, petrochemicals and unconventional fuels.
About Handan steel
HBIS Group core company—Handan Steel (hdgt.com.cn) was established and put into operation in 1958 and now Handan steel has developed into one important high-quality plate and strip production base in great China after over half a century of hard work and has comprehensively possessed an annual steel production capacity of 10 million tons with the total assets of 73.7 billion Yuan and employs about 24,000.
Handan steel products are widely used in the fields of automotive, home appliances, construction, ship building, aerospace, machinery manufacturing, petrochemical, etc. and in many national key projects.
GE (ge.com) is an advanced technology, services and finance company taking on the world’s toughest challenges. Dedicated to innovation in energy, health, transportation and infrastructure, GE operates in more than 100 countries and employs about 300,000 people worldwide.
GE also serves the energy sector by providing technology and service solutions that are based on a commitment to quality and innovation. The company continues to invest in new technology solutions and grow through strategic acquisitions to strengthen its local presence and better serve customers around the world. The businesses that comprise GE Energy—GE Power & Water, GE Energy Management and GE Oil & Gas—work together with more than 100,000 global employees and 2010 revenues of $38 billion, to provide integrated product and service solutions in all areas of the energy industry including coal, oil, natural gas and nuclear energy; renewable resources such as water, wind, solar and biogas; as well as other alternative fuels and new grid modernization technologies to meet 21st century energy needs.
* Trademark of General Electric Company.
Howard Masto, Masto Public Relations
P: +1 518 786 6488 / E: howard.masto[.]ge.com.
Ken Darling, Masto Public Relations
P: +1 518 786 6488 / E: kenneth.darling[.]ge.com.
Joseph Campbell, Edelman
P: +1 404 832 6789 / E: joseph.campbell[.]edelman.com.
GE news, Masto Public Relations / E: information[.]mastopr.com.